Select from our different colors and transparency
Custom content
Add privacy without blocking the view
SQUID is an elegant self-adhesive and transparent textile, allowing you to see out and keep the light, but keeps people from looking in during the day.
"Super happy with SQUID - it gave me the privacy, while keeping the view to the outside."
Renate H.
Blog posts
Logo list
Over 15,000 happy customers
B2B Introduction
The following page is explicitly intended for the professional architect/designer and contains all information to succesfully use Squid® in your residential and/or commercial projects.
How to install SQUID
Install SQUID in 9 easy steps
Step 1: Gather tools
You will need: scissors, spatula, utility knife and window cleaner to degrease the window (alcohol, ammonia)
Step 2: Clean window
Carefully clean and degrease the glass. Then dry the window with a fiber-free cloth
Step 3: Cut to size
Measure the window in height and width. Cut the SQUID and allow for an overlap of 5 cm on each side
Step 4: Peel SQUID
Peel off about ~20 cm of the SQUID plastic wrap so that the sticky side is exposed
Step 5: Stick 20cm of SQUID
Carefully centre and stick the 20cm SQUID without foil to the top of the window so that your SQUID is now hanging on the window
Step 6: Peel and stick
Peel off the foil little by little (every 20 cm), while gently rubbing the SQUID against the window, from top to bottom and from the center outwards
Step 7: Activate glue
Once all the foil is gone and all the SQUID sticks to the window, use the spatula to press the SQUID against the glass to activate the adhesive. Press from the center outwards
Step 8: Cut edges
Place the spatula next to the silicone edge of the window and hold the blade against the inside of the spatula. Cut off the 5cm excess edges. Use a new blade every 2m to prevent fraying
Step 9: Finish up
Press the spatula firmly over the entire surface of SQUID again, both horizontally and vertically, to activate all the adhesive. All done! Have fun with SQUID!